Description
New Replacement Flywheel balanced to the highest degree.
Comes complete with new Ignition Magnet and Gear as standard. This Flywheel will also work on Manual-Start Engines.
Roary the Repair Lion says:
Flywheel Nut Torque: 75 N·m (7.6 kgf·m, 55 lbf·ft)
Be sure the flywheel is fitted correctly. If it is not balanced when turning, it is indicating other internal engine issues. Check the crankshaft and its oil seal, bearings, camshaft, or there are possibly other internal engine faults. If you open the engine, you will need a gasket kit to rebuild it, as your engine uses "crush" gaskets that cannot be reused.
To prevent the engine turning the full cycle and not allowing you to tighten the flywheel nut, we suggest stopping the engine from turning by removing the spark plug and feeding clean rope into the spark plug hole. Be sure to leave some rope out so you can easily retrieve it after.
This flywheel comes with the electric start gear fitted. We get the factory to do this as we know how hard a job it can be to fit them. If your set up does not have electric start, do not worry, this gear will not affect the running of your engine and can be left in place when fitting the flywheel.
*Compatible part
We spend 1000's of hours every year providing Free Repair Advice. As you can imagine, this does not pay the bills! If you would like to buy us a coffee to say thanks, we would really appreciate it!
