*Need Parts for a Generator? Click here to go to our Generator Division*

Power Trowel engine parts

Choose your brand of Power Trowel to see available parts

See our selection of Power Trowel spares and parts to keep your small engine appliance working like new. We stock a range of small engine parts to repair and service your Power Trowel or similar machine. Find parts like carbs, spark plugs, air filters, oil filters, gaskets, recoils and pistons.

 

To ensure you find the right parts for your appliance, please select your brand from the options below. Choose your exact model of Power Trowel from the brand page.

Alternatively, see all the brands we stock here.

Click here to see all the brands we stock

Power Trowel Engine Parts & Concrete Finisher Spares

concrete pour is rapidly curing? In the concrete finishing trade, timing is everything, and an engine failure can ruin an entire slab. At Get Her Going, we supply commercial-grade power trowel engine parts and spares designed to withstand the abrasive dust and continuous high-load demands of professional concrete finishing gear.


Because walk-behind trowels and ride-on finishers run at sustained RPMs while maintaining high torque against tacky concrete, their engines take an absolute beating. We stock a premium inventory of heavy-duty replacement components engineered to guarantee reliability when the pressure is on. Browse our selection of precision carburetors, rugged recoil assemblies, and high-output ignition coils. We pay special attention to critical wear points, providing durable drive belts, and specialized air filters designed to seal out highly destructive concrete and cement dust.


Whether you are a flooring contractor polishing a commercial warehouse floor or a residential builder finishing a driveway, keeping your "concrete helicopter" running smoothly is vital. Our replacement parts are sourced for structural integrity and precise fitment across major small engine brands. Explore inventory by manufacturer to find the exact spares you need. If you need help verifying a crankshaft diameter, or overall engine compatibility, our team is standing by to help you.

Petrol Engine Machinery

Q. Why does my engine need the choke on to stay running?

A. Requiring the Choke to stay on to run is usually a fuel delivery problem and you should clean or replace the Air Filter and Carburetor. For further info on this, please Click Here:

Q. How do I fix a fuel leak from my Carburetor?

A. There are broadly two reasons for fuel leaking from the Carburetor. Either failed Seals or Gaskets. Or there is a Float Needle problem. We go into more if you Click Here:

Q. Why is my engine backfiring through the Carburetor?

A. On this type of engine, backfiring through the Carburetor is usually caused by problems in the Cylinder Head. Most commonly, the Valve Clearances need to be reset, or a Valve is stuck but this could also be other problems within the Cylinder Head so the parts need to be examined carefully. You can find a guide to resetting your Valve Clearances and more info, Click Here:

Q. I have no spark, what do I do?

A. There are initially three things to check, the low oil circuit, then the spark plug and ignition coil. For detailed instructions, Click Here:

Diesel Engine Machinery

Q. Why is my engine backfiring?

A. On this type of engine, backfiring is usually caused by problems in the Cylinder Head. Most commonly, the Valve Clearances need to be reset, or a Valve is stuck but this could also be other problems within the Cylinder Head so the parts need to be examined carefully. You can find a guide to resetting your Valve Clearances and further instructions, please Click Here:

Q. My starter motor is spinning but the engine will not fire?

A. These engines do not have a spark so this is often a fuel issue, for diagnostic steps, please Click Here:

Q. Why is my generator producing excess smoke?

A. This can depend on the colour of the smoke: black smoke is too much fuel/not enough air, so clean or replace the air filter then examine the injector; white smoke is usually water in the fuel, change the fuel and filters; blue smoke is a sign of burning oil, usually this is caused by failed valve seals or piston rings.

Electric Start Device

Q. Why does my generator battery keep going flat?

A. Generators recharge their own battery and the part that is responsible for this is called the Battery Charging Rectifier or Regulator and provides a steady voltage back to the battery while it is running, these parts are prone to overheating and failure, for please Click Here:

Q. Why doesn’t my electric start work?

A. Firstly, whether this is an engine problem or electric start problem needs to be established. If the generator starts with the pull start, please see the link below, it will describe the different electric start circumstances and what to do. Click Here:

Back To Homepage