Small Engine Parts for Repairs

Choose your brand of Small Engine to see available parts

Choose your brand of Small Engine to see available parts

See our selection of small engine spares and parts to keep your appliance working like new. We stock a range of small engine parts like carbs, spark plugs, air filters, oil filters, gaskets, recoils and pistons.

 

To ensure you find the right parts for your appliance, please select your brand from the options below. Choose your exact model of small engine from the brand page.

Small Engine Spares & Repair Parts

Is your outdoor power equipment acting up? Let’s get it repaired! At Get Her Going, we supply high-quality small engine spares and replacement parts designed to restore performance and extend the lifespan of your hard-working machinery. Whether you are tuning up a backyard lawnmower, reviving a chainsaw, or maintaining a commercial generator, finding the right component shouldn't be a hassle.


We stock a comprehensive selection of essential small engine parts, including reliable carburetors, durable pull starters, ignition coils, air filters, and spark plugs. By sourcing robust components built to handle high vibrations and heavy workloads, we help DIY mechanics and landscaping professionals alike tackle repairs with confidence.


Browse our inventory by manufacturer to find the exact match for your equipment. If you need assistance verifying compatibility with your specific engine model, our team is always ready to help you get your machinery back up and running.

Petrol Engine Machinery

Q. Why does my engine need the choke on to stay running?

A. Requiring the Choke to stay on to run is usually a fuel delivery problem and you should clean or replace the Air Filter and Carburetor. For further info on this, please Click Here:

Q. How do I fix a fuel leak from my Carburetor?

A. There are broadly two reasons for fuel leaking from the Carburetor. Either failed Seals or Gaskets. Or there is a Float Needle problem. We go into more if you Click Here:

Q. Why is my engine backfiring through the Carburetor?

A. On this type of engine, backfiring through the Carburetor is usually caused by problems in the Cylinder Head. Most commonly, the Valve Clearances need to be reset, or a Valve is stuck but this could also be other problems within the Cylinder Head so the parts need to be examined carefully. You can find a guide to resetting your Valve Clearances and more info, Click Here:

Q. I have no spark, what do I do?

A. There are initially three things to check, the low oil circuit, then the spark plug and ignition coil. For detailed instructions, Click Here:

Diesel Engine Machinery

Q. Why is my engine backfiring?

A. On this type of engine, backfiring is usually caused by problems in the Cylinder Head. Most commonly, the Valve Clearances need to be reset, or a Valve is stuck but this could also be other problems within the Cylinder Head so the parts need to be examined carefully. You can find a guide to resetting your Valve Clearances and further instructions, please Click Here:

Q. My starter motor is spinning but the engine will not fire?

A. These engines do not have a spark so this is often a fuel issue, for diagnostic steps, please Click Here:

Q. Why is my generator producing excess smoke?

A. This can depend on the colour of the smoke: black smoke is too much fuel/not enough air, so clean or replace the air filter then examine the injector; white smoke is usually water in the fuel, change the fuel and filters; blue smoke is a sign of burning oil, usually this is caused by failed valve seals or piston rings.

Electric Start Device

Q. Why does my generator battery keep going flat?

A. Generators recharge their own battery and the part that is responsible for this is called the Battery Charging Rectifier or Regulator and provides a steady voltage back to the battery while it is running, these parts are prone to overheating and failure, for please Click Here:

Q. Why doesn’t my electric start work?

A. Firstly, whether this is an engine problem or electric start problem needs to be established. If the generator starts with the pull start, please see the link below, it will describe the different electric start circumstances and what to do. Click Here: